INDEXATOR swivel: External thread x External thread

ED
Flexible gasket; on the INDEXATOR swivel, this allows direct installation in a threaded hole e.g. on a valve or casing. In the case of Indexator K100 swivels, threads with ED sealing present in addition a cone and can be screwed into the port and on a hose connection.

BSP
British Standard Pipe or Whitworth pipe threads complying with DIN 259 (BS 2779) or DIN 2999 (BS 21), also called “inch thread”.

BSPP
British Standard Pipe Parallel – G, cylindrical thread with seal on cone or sealing cone with O ring. Screw-in threads are sealed with edge sealing or O ring at the join with the threaded hole. DIN/ISO 228-T1, BS 5200, ISO 12152-6

G
BSPP, cylindrical pipe thread, seal as 60° cone for hose connections. Screw-in thread sealed with edge sealing, ED seal, or O ring (ISO 228 Part 1).

ED
Flexible gasket; on the INDEXATOR swivel, this allows direct installation in a threaded hole on a valve or casing. In the case of Indexator K100 swivels, threads with ED sealing present in addition a cone and can be screwed into the casing and on a hose connection.

BSP
British Standard Pipe or Whitworth pipe threads complying with DIN 259 (BS 2779) or DIN 2999 (BS 21), also called “inch thread”.

BSPP
British Standard Pipe Parallel – G, cylindrical thread with seal on cone or sealing cone with O ring. Screw-in threads are sealed with edge sealing or O ring at the join with the threaded hole. DIN/ISO 228-T1, BS 5200, ISO 12152-6

G
BSPP, cylindrical pipe thread, seal as 60° cone for tube connections. Screw-in thread sealed with edge sealing, ED seal, or O ring (ISO 228 Part 1).

JIC
Joint Industry Conference, name for 37° conical connection with UNF thread (ISO 8434-3)

UNF
Unified National Fine, US standard thread on cylindrical threaded stems. This is also called ISO threads specified in inches. This thread is used e.g. for JIC 37°, ORFS, and SAE 45° connections (SAE J516, Ansi B1.1.)

JIC
Joint Industry Conference, name for 37° conical connection with UNF thread (ISO 8434-3)

UNF
Unified National Fine, US standard thread on cylindrical threaded stems. This is also called ISO threads specified in inches. This thread is used e.g. for JIC 37°, ORFS, and SAE 45° connections (SAE J516, Ansi B1.1.)

ORFS
O ring face seal, fitting with face side O ring seal (ISO 8434-3, ISO 12151-1)

UNF
Unified National Fine, US standard thread on cylindrical threaded stems. This is also called ISO threads specified in inches. This thread is used e.g. for JIC 37°, ORFS, and SAE 45° connections (SAE J516, Ansi B1.1.)

M
Metric ISO pipe threads; always cylindrical threads on INDEXATOR swivels. Connections with 24° conus light (L) and heavy (S) series (ISO 12151-2, ISO 8434-1, ISO 8434-4)

ED
Flexible gasket; on the INDEXATOR swivel , this allows direct installation in a threaded hole on a valve or casing. In the case of K100 swivels, threads with ED sealing present in addition a cone and can be screwed into the casing and on a tube connection.

BSP
British Standard Pipe or Whitworth pipe threads complying with DIN 259 (BS 2779) or DIN 2999 (BS 21), also called “inch thread”

BSPP
British Standard Pipe Parallel – G, cylindrical thread with seal on cone or sealing cone with O ring. Screw-in threads are sealed with edge sealing or O ring at the join with the threaded hole. DIN/ISO 228-T1, BS 5200, ISO 12152-6

G
BSPP, cylindrical pipe thread, seal as 60° cone for tube connections. Screw-in thread sealed with edge sealing, ED seal, or O ring (ISO 228 Part 1).

M
Metric ISO pipe threads; always cylindrical threads on INDEXATOR swivel. Connections with 24° conus light (L) and heavy (S) series (ISO 12151-2, ISO 8434-1, ISO 8434-4)